Gates are not a part of what we do... Gates are all we do

Accessories


Shopping cart is empty.
  • Altronix PT724A (12-24V DC-AC) Annual Event Timer
    Altronix PT724A (12-24V DC-AC) Annual Event Timer
    Altronix is a leading manufacturer of electronic components for select industries, including security, access control, fire alarm systems, CCTV, industrial and home automation.

    Altronix PT724A Timer- 365 day 24 hr timer 12/24 VDC.

    Manufacturer's Page With Manual and Instructions
    • Shop Temporarily Closed. Call Us to Order.
    More Product Details
  • DK1400-080 DoorKing Fire Department Padlock Box
    DK1400-080 DoorKing Fire Department Padlock Box
    DoorKing Fire Department Padlock Box, DK1400-080. Accepts Knox padlock and activates the gate (or door) when the padlock is removed. Painted bright red and labeled "FIRE DEPT." Does not include padlock.
    • Shop Temporarily Closed. Call Us to Order.
    More Product Details
  • DK2600-657 DoorKing Key 16120
    DK2600-657 DoorKing Key 16120
    Doorking Key #16120.
    • Shop Temporarily Closed. Call Us to Order.
    More Product Details
  • Elite DC1000 Battery Backup Unit
    Elite DC1000 Battery Backup Unit
    The Elite DC1000 Battery Backup Unit opens automatic gates in the event of a power loss to keep traffic moving.

    Installation Instructions
    • Shop Temporarily Closed. Call Us to Order.
    More Product Details
  • Elite DC2000 Battery Backup Unit
    Elite DC2000 Battery Backup Unit
    The Elite DC2000 Battery Backup Unit opens automatic gates in the event of a power loss to keep traffic moving.





    Installation Instructions

    DC2000 backup wiring for OmniControl Board
    • Shop Temporarily Closed. Call Us to Order.
    More Product Details
  • EMX IRB4X Photo Eyes
    EMX IRB4X Photo Eyes
    The IRB4X photo eyes (thru beam) are used as a safety device to help prevent damage or injury when an object obstructs the path of a gate. Available in 12 and 24 VAC/VDC, 45-foot range. Reliable and easy to install. Requires wire under driveway. Protective hood made from anodized aluminum included. This is for one pair of photo eyes (2 photo eyes).


    • Shop Temporarily Closed. Call Us to Order.
    More Product Details
  • EMX NIR PhotoEye, Reflective 31 ft range
    EMX NIR PhotoEye, Reflective 31 ft range
    Retro-reflective photoelectric sensor, block type - NIR - EMX



    • Shop Temporarily Closed. Call Us to Order.
    More Product Details
  • Fire Strobe 2000 - Access Products
    Fire Strobe 2000 - Access Products
    Features:
    1. Dual frequencies 14.035 Hz +/- .25Hz and 10.0 Hz for class II signals. New learn option mode for Double and Quad flash strobes when using STROBEWATCH.

    2. The FIRE STROBE 2000 is 100 percent digital and fully compatible with the OPTICOM priority control emitter.

    3. The FIRE STROBE 2000 responds to both the high and low priority outputs of both the OPTICOM and STROBECOM II* emitters and with the unit set in STROBEWATCH mode.

    4. For all 911 response vehicles with Preemption Strobe Emitters, and it will respond to both dual and quad flash strobes.

    5. For all automatic motorized gates.

    6. Sixteen year installed base in all major fire districts in the U.S including OCFA.

    7. Installed and serviced by access control dealers nationwide.

    8. Made in the USA.
    I. BASIC CONCEPT

    The FIRE STROBE 2000 signal is received optically by line of sight. The range varies with the ambient light and intensity of the strobe emitter. A typical range varies from 150 feet to 500 feet. The detector will not allow false operation with unwanted signals from radio interference and/or flashing headlights or loud sounds as it is 100 percent digital.

    The acquisition time from the emitter light source to the discriminate module is approximately 500ms.

    The FIRE STROBE 2000 is widely used for security/electric gate access. It can be used for firehouse garage doors and other related access needed by emergency vehicles. This emergency-vehicle strobe detector provides rapid access to any gated community that has been serviced by fire and emergency equipments from the OPTICOM* Strobe system and now with our new STROBEWATCH feature, it responds to both double and quad flash strobes found on many police and emergency vehicles.

    II. INSTALLATION & TESTING

    Complete installation instructions are provided with the FIRE STROBE 2000 for simple hook-up of the unit to interface with your gate or access control. Two dry contacts are also provided for bi-directional operation where needed.

    The photoeye assembly is typically mounted 8 feet to 10 feet above the street level and is aimed for optimal strobe signal. (A total of (2) photoeye assemblies may be used) A 12 VAC power supply is provided with the FIRE STROBE 2000 system.

    Testing can be accomplished with the optional fire strobe transmitter tester. This FIRE STROBE 2000 transmitter will enable a throughput of signals from the photoeye assembly to the relay output. This is a hand-held transmitter which operates via 9-Volt battery.

    III. TECHNICAL SPECIFICATIONS

    1. Frequency 14.035 Hz +/- .25Hz for class II signals. New learn option for double and quad flash strobes.

    2. The FIRE STROBE 2000 is fully compatible with the OPTICOM* priority control emitter.

    3. Responds to both the high and low priority outputs of both the OPTICOM and STROBECOM II emitters and with the unit set in STROBEWATCH mode it will respond to both dual and quad flash strobes.

    4. The strobe acquisition time is programmable from 500ms-2000ms.

    5. The nominal field of view ( half power points) is 15 deg off axis (a conical beam pattern).

    6. The PC board construction is mounted in the enclosed 8" x 8" x 4" rain-tight NEMA J-Box.

    7. The weight is approximately seven pounds.

    8. The power requirements are 12/24 Volts AC/DC non-polarity conscious, approximately 1 Watt draw.

    IV. WARRANTY

    The FIRE STROBE 2000 has a one year warranty when used according to the manufacturer's specifications. This warranty does not apply when the FIRE STROBE 2000 has been abused, over voltaged , or altered in any way. The warranty coverage is at the sole discretion of the manufacturer. This unit is to be used only for the operations as described above.*OPTICOM is a trademark of 3M

    More Information

    Installation Guide

    • Shop Temporarily Closed. Call Us to Order.
    More Product Details
  • HID Proximity Key Fob (sold in lots of 10ea)
    HID Proximity Key Fob (sold in lots of 10ea)
    Sold in tubes of 10 only.

    Small enough to fit on a key ring.

    Universal compatibility with HID proximity readers.

    Lifetime warranty from the manufacturer.

    Dimensions:
    1.90in x 0.90in x 0.345in (4.83 x 2.29 x 0.88 cm)

    Weight: 0.26 oz. (7.3 gm)

    Ordering Process and Information:

    If you are unsure of what type to order etc. you can contact us for help at 800-748-1383.

    When ordering , we need the following information:

    *Facility Code (Custom Formats also need: Site Code, City Code, OEM Code and are an additional charge.)

    *Open Ranges (numbers that are not currently programmed into your software.)

    ONCE WE RECEIVE YOUR INFORMATION IT WILL TAKE APPROXIMATELY 2 WEEKS TO SHIP THIS ITEM TO YOU. PRICE IS FOR 10 TRANSMITTERS IN A TUBE.

    Note: For security purposes, we will not clone specific numbers.
    • Shop Temporarily Closed. Call Us to Order.
    More Product Details
  • Interstate Battery Optima 12 V. Deep Sealed Battery
    Interstate Battery Optima 12 V. Deep Sealed Battery
    This deep cycle marine battery provides low maintenance power to your gate operator. The SRM-27 has an outstanding cycle life and uses a unique chemical alloy on the battery connectors to slow acid penetration and reduce corrosion. Provides 12 Volts; RC 160 minutes; 750 cranking amps; 600 cold cranking amps. Terminal auto/stud posts. Maintenance tip: It is recommended you refill the water in your battery every 6 months.



    Please call 1-800-748-1383 for shipping.
    • Shop Temporarily Closed. Call Us to Order.
    More Product Details
  • Miller Safety Edge Sensor - Square 5 Ft
    Miller Safety Edge Sensor - Square 5 Ft
    The MGS20 is designed for use on 2 inch square gates. To install, simply attach with screws through mounting tabs and into gate. This edge cannot be bent or folded.

    Designed specifically for easy installation on standard 2î square frames, the MGS20 offers 3-sided activation for an added measure of protection. When touched, these electrically activated edge sensors immediately signal the gate operator to stop and/or reverse. The sleek design will not detract from the appearance of the gate.

    Installation Instructions

    Color: Black
    Length: 5 ft
    Lead Wire: SJTO, 18 gauge, 2ft. length
    Sensitivity: nominal 4 psi
    Electrical Diagram: 2 wire N.O. configuration
    Electrical Requirements: 24 volt AC or DC, 1/2 amp
    Contact Element: AlumaglasÆ
    Materials: Base = Rigid extruded PVC Cover = Flexible PVC
    Temperature Range: -30∞F to +155∞F
    Wire Outlet Location: Specify universal, right, or left side
    Manufacturer's warranty only.

    Manufacturer's Web Site

    FAQ

    • Shop Temporarily Closed. Call Us to Order.
    More Product Details
  • MultiCode 1066-03 Antenna Kit
    MultiCode 1066-03 Antenna Kit
    Allows you to extend the range on multi code coaxial radio receivers equipped with a type F (coaxial) screw connector. 14' coaxial cable with antenna and bracket.

    Permits the remote location of the antenna on radio receivers equipped with a type F screw connector. The antenna can be moved away from a metal structure or to an outside location for better receiver performance. This unit is used with the 1099, 1099-50, 1099-30, 1099-20 and 3021-8 Series receivers.
    • Shop Temporarily Closed. Call Us to Order.
    More Product Details